The Las Vegas 2000 mm (79″) aluminium French cleat Z-Bar mounting rail is a heavy-duty, un-drilled hanging profile engineered for secure, flush wall-mounting of large mirrors, heavy artwork, architectural panels, and commercial displays. Extruded from high-grade aluminium, this un-punched profile gives trade installers and fitters complete flexibility to drill custom fixing holes matching exact wall stud locations or masonry anchor centers on site.
Key System Benefits
Ultra Heavy-Duty 270 kg Load Rating — High-grade extruded aluminium profile supports up to 270 kg when properly anchored into timber wall studs or solid masonry surfaces.
Un-Punched Custom Profile — Blank channel allows precise, custom hole drilling during installation to align perfectly with wall stud spacings or existing anchor points.
Slimline 12.8 mm Wall Projection — Low-profile interlocking design holds heavy items securely against the wall with just 12.8 mm depth projection for a clean, professional fit.
Modular & Mix-and-Match Compatible — Interlocks seamlessly across all rail lengths in the Metalciti Las Vegas Series, allowing you to pair a 2000 mm wall rail with shorter cleat segments on your frame.
Technical Specifications
Rail Length: 2000 mm (79″ / 2 Metres — easily cut to custom lengths with a standard hacksaw)
Maximum Weight Capacity: 270 kg (Subject to wall substrate and anchor rating)
Profile Hole Type: Un-Drilled / Un-Punched (Blank profile for custom site drilling)
Wall Depth Projection: Slimline 12.8 mm profile depth
Vertical Lift-Off Clearance: Requires 11.2 mm vertical lift clearance for mounting/dismounting
Series Compatibility: Interlocks with all Metalciti Las Vegas Series Z-Bar cleat configurations
Modular Z-Bar Interlocking System Guide
The Las Vegas Z-Bar system is engineered with a fully modular design. Because the interlocking cleat profile remains consistent across the entire Metalciti Las Vegas range, a longer rail mounted horizontally to the wall can easily support shorter rail segments attached to your frame or panel—or vice versa. This lets you purchase exact individual quantities, adjust anchor placement around existing wall studs, and create custom configurations without paying for excess hardware.
Common Installation Configurations:
• Standard Continuous Fit: One 2000mm rail on the wall paired with one 2000 mm rail on the item.
• Split Anchor Fit: One 1200mm rail on the wall paired with two or three 300mm rail segments mounted across the back of the item.
• Custom Offset Fit: One 900mm rail on the wall paired with three 50mm rails on the item.
Installation & Structural Load Safety
- Measure and drill custom fixing holes along the un-drilled aluminium channel using an appropriate metal drill bit.
- Fasten one Z-Bar rail to the wall pointing upward and outward using suitable wall plugs or stud screws.
- Fasten the matching Z-Bar rail to the rear top edge of your item pointing downward and inward.
- Lower the item onto the wall rail until the cleats interlock firmly. Ensure you have at least 11.2 mm vertical clearance above the frame to slide the cleats together.
Load Capacity Safety Note: The stated 270 kg weight capacity refers to the structural strength of the aluminium Z-Bar rail itself. In heavy-duty applications, wall fixings or plasterboard construction will typically fail before the aluminium profile. Always ensure your wall structure and anchor fixings are rated to support the total load.
What’s Included in the Box
• 1 × Las Vegas Aluminium Z-Bar French Cleat Rail 2000 mm (Un-Drilled – 270 kg Rating)
Note: Rails are sold individually (not in pairs) to allow custom length combinations. Fixing screws, wall plugs, and drill bits are sold separately.
